1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
1 x Camera Module OV2640 2MP
|SPI Flash||default 32Mbit|
|RAM||internal520KB+external 4M PSRAM|
|bluetooth||bluetooth4.2BR/EDR and BLE standards|
|Support interface||UART, SPI, I2C, PWM|
|Support TF card||Maximum support 4G|
|Serial port rate||default 115200 bps|
|Image output format||JPEG (only supported by OV2640), BMP, GRAYSCALE|
|Spectrum range||2412 ~ 2484MHz|
|Antenna form||onboard PCB antenna , gain 2dBi|
|Transmit power||802.11b: 17±2 dBm (@11Mbps)
802.11g: 14±2 dBm (@54Mbps)
802.11n: 13±2 dBm (@MCS7)
|Receiving sensitivity||CCK, 1 Mbps : -90dBm
CCK, 11 Mbps: -85dBm
6 Mbps (1/2 BPSK): -88dBm
54 Mbps (3/4 64-QAM): -70dBm
MCS7 (65 Mbps, 72.2 Mbps): -67dBm
|Power consumption||Turn off the flash: 180mA@5V
Turn on the flash and adjust the brightness to the maximum: 310mA@5V
Deep-sleep: The lowest power consumption can reach 6mA@5V
Moderm-sleep: up to 20mA@5V
Light-sleep: up to 6.7mA@5V
|Power supply range||5V|
|Operating temperature||-20 °C ~ 85 °C|
|Storage environment||-40 °C ~ 90 °C, < 90%RH|
ESP32-CAM Picture Output Format Rate:
Test environment: camera model: OV2640 XCLK: 20MHz, the module transmits pictures to the computer browser by WiFi.
Sai Dev –
Great Product at a best price i already started using this working is awesome