NodeMcu Lua ESP8266 ESP-12E WIFI Development Board

Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)

$9.99

  • Power input: 4.5V ~ 9V (10VMAX), USB-powered
  • Wireless 802.11 b / g / n standard
  • Transfer rate: 110-460800bps
  • Support STA / AP / STA + AP three operating modes
  • Working temperature: -40 ℃ ~ + 125 ℃
  • Built-in TCP / IP protocol stack to support multiple TCP Client connections (5 MAX)

46 in stock

SKU: 985891 Category:

Description

 

 

 

CH340 chip-driven official description: 

WINDOWS driver USB to serial CH341 / CH340 installation package Support WINDOWS VISTA / Server 2008 / Win7 / Win8 / Win8.1 32 Bit / 64 and MAC Through Micro soft’s digital signature authentication In the computer end of the USB device emulation as a standard serial devices Serial COM It contains the serial number and identification CH34X monitoring CH34X equipment swap library.
Driver: Click Here To Download Driver

Feature:

Wireless 802.11 b / g / n standard
Support STA / AP / STA + AP three operating modes
Built-in TCP / IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD0: 1 channel ADC
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Current: continuous transmission: ≈70mA (200mA MAX), Standby: <200uA
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Remote firmware upgrade (OTA)
Support Smart Link Smart Networking
Working temperature: -40 ℃ ~ + 125 ℃
Drive Type: Dual high-power H-bridge driver

Package included:

1 x NodeMcu Lua ESP-12E WIFI Development Board

2 reviews for NodeMcu Lua ESP8266 ESP-12E WIFI Development Board

  1. Rated 5 out of 5

    Paolo Manili

    Attachment

    I bought one of these to develop software for Sonoff relays (given they share the main architecture). It works very well and it is very convenient as it has a micro USB connection. The packaging was adequate with plenty of foam protecting the unit, though maybe a little foam on the pins might help too as in my package they had punched through the ESD packaging. Still, no harm was done and it works flawlessly. Recommended

  2. Rated 5 out of 5

    robert.poloboc (verified owner)

    Attachment

    I ordered this module for a project of mine, and it works flawlessly. It can be simply programmed with the free Arduino IDE through it’s MicroUSB interface. The package was good, the foam ensured that the board doesn’t get damaged. Highly recommend this module.

Add a review

0

Your Cart